- MTG/C blast furnace gas burner
- MTG/D automatic large split type gas burner series
- MTG/F generator gas burner
- MTG/J coke oven gas burner
- MTGL automatic integrated oil and gas burner serie
- MTG/N split high temperature gas burner
- MTG automatic one - piece gas burner series
- MTL/B automatic large split type light oil burner
- MTL automatic one - piece fuel burner series
- Low NOx burner
MTL-B
MAGNATEMTL/BType burner used in today's world of advanced combustion technology, with reference to international and domestic standards manufacturing mechanical and electrical integration of the automatic split type fuel burner, this type of burner fuel quantity change in continuous mode, control system equipped with load ratio control instrument becomes continuous proportional control, proportional control instrument is not equipped with load, sliding mode for two stage. The products are widely used in steam boilers, hot water boilers, heat conduction oil furnaces, direct-fired lithium bromide air conditioning units, air heating furnaces and other industrial furnaces.
MTL/BType v burner valve sets, nozzles, oil volume regulator, program controller, damper actuator, etc. all adopt international famous brands to ensure excellent burner performance, safe performance and reliable operation.
MTL/BType v burner has low noise and meets the environmental protection requirement.
MTL/BThe type v burner can change the rotation Angle of the intake air by adjusting the intake air Angle of the cyclone blade so as to adjust the geometric size of the flame.
MTL/BType v burner can be selected to adapt to different boiler chamber back pressure, even if the furnace chamber back pressure is high, but also maintain a stable and non-pulsating combustion.
MAGNATEMTL/BExamples of performance characteristics of series fuel burners are as follows:
● Fully automatic operation, suitable for a wide range of power
● Fully automatic operation, the burner from flameout protection, into and out of oil pressure protection, wind pressure protection, load regulation, furnace purge and other processes are automatically controlled
● Prepurge the furnace
● Safe flame monitoring system
● The geometry of the burner flame is adjustable
● According to the requirements of the corresponding parts of the transformation can be adapted250℃Below high temperature combustion air.
● Easy installation, commissioning and maintenance
● SiemensLMVElectronic proportional control system(optional)
● The flue gas oxygen quantity feedback regulation realizes the energy saving(optional)
● Environmental protection standards, ultra-low emissions(optional)
Technical parameters:
Model |
MTL1050/B |
MTL1400/B |
MTL1750/B |
MTL2100/B |
MTL2450/B |
Capacity MW |
16.6 |
21.35 |
26.09 |
33.21 |
37.95 |
Fuel |
Light oil |
||||
Power supply |
380V 3/N/PE 50HZ |
||||
Regulation mode |
Slide two-stage or proportional control |
||||
Sequence controller |
LAL2.25&LGK16** |
||||
Ignition transformer |
2×7000V |
*The *viscosity of light oil is 6cSt (1.5ºE)
*For burners that operate continuously
Flame Size:
Installation Dimensions:
|
MTL1050/B |
MTL1400/B |
MTL1750/B |
MTL2100/B |
MTL2450/B |
D1 |
φ595 |
φ650 |
φ680 |
φ780 |
φ800 |
D2 |
φ660 |
φ720 |
φ720 |
φ842 |
φ842 |
D3 |
φ560 |
φ620 |
φ660 |
φ730 |
φ770 |
L1 |
350 |
360 |
360 |
350 |
350 |
L2 |
1660 |
1800 |
1790 |
1940 |
1940 |
L3 |
800 |
833 |
860 |
860 |
900 |
H1 |
850 |
900 |
950 |
1000 |
1000 |
H2 |
1345 |
1384 |
1490 |
1544 |
1544 |
A×B |
440×690 |
500×760 |
540×780 |
600×850 |
610×850 |