- MTG/C blast furnace gas burner
- MTG/D automatic large split type gas burner series
- MTG/F generator gas burner
- MTG/J coke oven gas burner
- MTGL automatic integrated oil and gas burner serie
- MTG/N split high temperature gas burner
- MTG automatic one - piece gas burner series
- MTL/B automatic large split type light oil burner
- MTL automatic one - piece fuel burner series
- Low NOx burner
MTL280-B
(MAGNATE)MTLSeries combustion light oil burners are based on the advanced combustion technology in the worldEN267It is widely used in steam boiler, hot water boiler, heat conduction oil furnace, direct-fired lithium bromide air conditioner, air heating furnace and other industrial kilns.
MTLSeries light oil burners are designed in detail, easy to install, low noise and meet the environmental protection requirements. Users only need to connect the power supply and oil can be used.
MTLThe pumps, nozzles, programmed controllers and damper actuators of the light oil burner series adopt international famous brands to ensure excellent burner performance, safe performance and reliable operation.
MTLSeries light oil burner can be used in accordance withDIN51603Standard light oil, oil viscosity:20℃6cSt。
MAGNATEMTLExamples of performance characteristics of series of light oil burners are as follows:
● Fully automatic operation, suitable for a wide range of power
● Low running noise
● Prepurge the furnace
● Safe flame monitoring system
● When the burner stops, the damper automatically closes
● Easy installation, commissioning and maintenance
● Environmental protection standards, ultra-low emissions
Installation Dimensions:
Model |
L1 |
L2 |
L3 |
L4 |
L5 |
L6 |
L7 |
B1 |
B2 |
B3 |
H1 |
H2 |
H3 |
H4 |
D1 |
D2 |
D3 |
D4 |
D5 |
D6 |
D7 |
R |
MTL280/B |
119 |
945 |
8 |
270 |
300 |
68 |
390 |
945 |
494 |
440 |
672 |
482 |
260 |
482 |
265 |
380 |
260 |
268 |
M12 |
330 |
278 |
950 |
Technical parameters:
Model |
MTL280/B |
Fuel |
Light oil |
Capacity kW Mcal/h |
830~4507 714~3876 |
Oil consumption kg/h |
70~380 |
Power supply |
380V 3/N/PE 50Hz |
Rated power of motor Operation current Speed Insulation Protection |
10KW 19.9A 2900rpm B IP55 |
Regulation mode |
Slide two-stage or proportional control |
Sequence controller |
LAL2.25&LGK16** |
Ignition transformer |
2×7000V |
Oil pump |
TA3 |
Flame size Φmm×L mm |
910×4300 |
Burner weight |
125kg |
*The viscosity of light oil is 6cSt (1.5ºE)
*For burners that operate continuously
Curve of relationship between burner output power and combustor pressure